Understanding, Configuring, and Managing Cisco 9800 series Controllers with Catalyst Center (DNAC) Integration (C9800DNAC) - Lab Topology

 

Lab Topology

C9800 Labs Day 1 and Day 2

  • Deploy 9800 Controller
  • Configure Catalyst Wireless Controller: New Config Model
    • PSK
    • Authentication and Authorisation
      • Add C9800 to ISE
      • 802.1x
      • 802.1x AAA Override
      • Web Authentication (Local Webauth and Central Webauth)
    • MPSK
  • Configure FlexConnect – Central Authentication/Local Switching
  • Enabling and Using AVC
  • Tweaking RRM Parameters
  • Rogue Detection
  • Adaptive WiPS
  • Clean Air
  • Troubleshooting
  • Wireless Debug Analyzer

Catalyst Center Labs Day 3 and 4

  • Create Sites and building
  • Configure Network Settings
  • Configure PnP with Access Points
  • Using the Discovery tool to build the Inventory
  • Manually add other devices to the Catalyst Center
  • Configure PnP with C9800
  • Configure C9800 HA
  • Use the Template Editor
  • Use the Command Runner
  • Policy Applications
  • Integrating ISE into Catalyst Center
  • Creating SSIDS and Managing 9800 devices in Catalyst Center
  • Place APS on Floor Map
  • Software upgrade of 9800 ISSU with Catalyst Center
  • Catalyst Center Assurance
    • Health
    • Network Health
    • Clients Health
  • Enable and use Intelligent Capture
  • Rogue Management and aWIPS Dashboard
  • Catalyst Center Reports
  • Troubleshooting Cisco Networks using Catalyst Center